Related Links
Steel Roofing and Cladding

Available Finishes

  • Pre Painted Galvanized Steel (PPGI)
  • Al-Zn Alloy Coated Steel (Bare Galvalume)
  • Colour Coated Al-Zn Alloy Coated Steel (Colour Coated Galvalume)

Recommended Roof Slope

After extensive research, study and tests, the Metal Building Manufactures Association (MBMA) had recommended roof slope of 1:10 as best suited and optimal for steel roofing sheets. Sathyam Steel Roof subscribes to this standardization process. However, designers are free to choose slope of their choice keeping factors like heat dissipation, operational requirements, energy conservation and environmental factors in mind. Our profile is suitable for adaptation to slope as designed.

Recommended Thickness

Pre painted Galvanized Steel (240Mpa) : 0.47-0.50 mm TCT
Al-Zn alloy coated Steel (550 Mpa) : 0.47mm TCT
Colour Coated Al-Zn Alloy Coated Steel (550 Mpa) : 0.47-0.50mm TCT


Roof and Wall Cladding

Color Choice

*Actual Colour may differ slightly from the shown example.
Panels may be specially ordered to any base metal specification, coating finish, colour and thickness. Consult a Sathyam Steel representative for price and delivery.

Steel Klip Sheets

Steel-Klip is a long-length roof and wall cladding system.It is strong, durable and versatile, giving the strength and advantages of steel. Its smart fluted pans and a lock-action rib, when combined with concealed fastening, make it a practical material for use on applications from roof pitches as less as 1 degree to vertical or horizontal ribbed walling.
The Galvalume steel used in the manufactures of Steel-klip system complies with ASTM A806 "Prepainted and organic film/metal laminate products".

Steel-Klip system is available in 12m lengths. Longer lengths are available on request.
Lengths +0, -15mm, cover width +2 mm


Composite slabs are a very practical and economical means of creating a floor system and works particularly well in conjunction with composite beam construction.
SATHYAM STEEL DECK is designed to act as a composite deckform and fulfils all the basic requirements that are mandatory for any composite deckform.

Purlins And Accessories

Cold Form Purlins

Typical Z-Section Typical C-Section

Purlins are cold formed "Z" and "C" shaped sections of thickness within the range of 1.6mm to 2.5mm are made of high grade steel confirming to ASTM A607 grade 50 with factory painted one coat of red-oxide, primer with standard punching.

Curved Profiled Sheets

Crimp Curve
For Improved Aesthetics
North Light Curve
For Industrial Applications

Contact Us
Traverse International Pte Ltd
16 Tuas South Street
7, Singapore 637113
Tel: +65 6734 0510/20 Fax: +65 6734 0598
Mob: +65 9003 9715 Enquiry:


Copyrights Reserved 2014 | Traverse

Back to Top